All manufacturers Control Company Delta OHM DeWit Dickson Fuji Technologies Graphic Controls Honeywell Isuzu Seisakusho Kobayashi Monarch Instruments Nuova Fima Sensing Precision tecnocarta Termaf S. N. C Trotec UEI Test Measurements
-- Product Name: A to Z Product Name: Z to A Sort by
Manufactured since the late 1960’s Sensing Precision Limited’s WFG and WRFG are used for accurate control and measurement of air on many HVAC, Food, Pharmaceutical, Petro-Chemical and Nuclear projects worldwide. They produce average total and sub-static pressures signals to generate an enhance velocity pressure signal, outside the duct wall, that...
Select to compare
Designed for accurate control and measurement of air in the HVAC and other industries. They generate an averaged signal for both the total and sub-static pressures along the length of each leg to generate a differential pressure signal that directly relates to volume flow. Providing accurate and reliable outputs at a highly competitive price.
X-Grids will give useful,reliable readings in a wide variety of ‘in duct’ locations often where other flow rate measuring devices are found to be unsatisfactory or difficult to install. They generate an averaged signal for both the total and sub-static (X) or static (UX) pressures along the length of each tube to generate a differential pressure signal...
They generate an averaged signal for both the total and sub-static pressures along the length of each probe to generate a differential pressure signal that directly relates to volume flow. More accuracy can be gained dependent upon the number of pairs installed to make up a grid.
The Manual & Auto-Preset Cab Leakage Tester was designed for use in the automotive industry to measure the air tightness of cabin areas. It can also be applied to many other sealed volumes such as example ducting runs and interior spaces with buildings,Distinct feature of being able to pre-set the static pressure and automatically control this...
100mm Dia HD Vane Anemometer & Multi Vane Array Systems The most robust version of Sensing Precision Limited’s highly successful 100mm diameter rotating vane anemometer head. Fully potted high temperature electronics, housed in an aluminium enclosure. Each vane head supplied calibrated with...
The CEGRIT is an Automatic Isokinetic Sampling device that has been used and developed, for over 50 years, to extract fly-ash and dust particle from boiler gas mixtures. Air borne gas particulates, from 5µm to 250µm, are extracted isokinetically even when stack gas velocity fluctuations occur during the extraction period. Today Sensing Precision...
Sensing Precision Limited has a team of dedicated and experienced air measurement design engineers providing solutions to customer requirements. This can range from fitting a pitot tube with a small diameter /length of duct for velocity or flow measurement; to designing a Building Leakage Tester Measuring section.
• Award-Winning Combustion Meter use the new EOS Sensor Technology • No oxygen sensors to wear down or replace • Lowers the annual cost of ownership and provides greater reliability
Eagle 2X eliminates the annual replacement and calibration of the O2 sensor. Replaced with the EOS Technology™ CO2 sensor, offering direct measurements of CO2 and calculating O2. This lowers the cost of ownership
items: 10 20 50
Subscribe Unsubscribe
Discover our stores
