All manufacturers Control Company Delta OHM DeWit Dickson Fuji Technologies Graphic Controls Honeywell Isuzu Seisakusho Kobayashi Monarch Instruments Nuova Fima Sensing Precision tecnocarta Termaf S. N. C Trotec UEI Test Measurements
-- Product Name: A to Z Product Name: Z to A Sort by
These instruments are created to measure very low pressure and depression from 0-25 to 0+1000 mbar for use on gas and dry air where there are particucal conditions of aggressiveness.
Select to compare
These instruments are realized for food processing , pharmaceutical petrochemical industries. They are built to resist to the most severe condition created by the process midium and by for those fluids which have high viscosity and do not cristallize.The glycerin filling renders these suitable instruments for the pressed employment on,...
These instruments are created to measure very low pressure and depression from 0-25 to 0+1000 mbar for use on gas and dry air.
They are designed to measure pressure or vacuum of viscous, sedimentous, crystallizable or corrosive fluids.The glycerin filling renders these suitable instruments for the pressed employment on, oleodinamiche telephones exchange, upsets of it etc.
They are realized to isolate the sensing element of the manometers from fluid which may be corrosive, viscous, sedimentous and/or a high temperature.The diaphragm welded to the upper body and leak proof tested, ensure separation of filling liquid from process medium. Diaphragm faced position permit an accurate and deeper cleaning
Realized for isolating the sensitive element of the manometers form fluid which may be corrosive, viscous, sedimentous and/or a high temperature.Faced diaphragm position enables deep cleaning of the surface, while the quick-connection enables frequent removal from the process during sterilization and cleaning operations, a common requirement in...
They are designed to isolate the sensing element to the pressure gauges from process fluids that may be corrosive viscous sedimentaous and/or with a high temperature.The diaphragm is welded to the body to ensure separation of the filling fluid from the process medium.
They are realized to isolate the sensing element of the manometers from fluid which may be corrosive, viscous, sedimentous and/or a high temperature.Designed in accordance with food and pharmaceutical standards to permit easy removal from the plant whilst maintains the hygienic feature during frequent cleaning.
They are designed to isolate the sensing element of pressure gauges from process fluids which may be corrosive, viscous, sedimentous, and/or with a high temperature
items: 10 20 50
Subscribe Unsubscribe
Discover our stores
